Ruian Huayu Shoes Industrial Co., Ltd：safety shoe，industrial safety shoes, leather safety shoes, work shoe, safety boots, work boots, safety footwear.

PRODUCTS LIST

-	Low Cut Safety Shoes

-	Middle Cut Safety Shoes

-	Long Cut Safety Boots

-	Newest Development

-	Work and Protective Shoes

-	OUTSOLE PATTERN

CONTACT US

-	TEL:+86-577-82557756

-	FAX:+86-577-65572265

-	MOBILE:+86-13567752827

-	E-MAIL: sales@goldasafety.com
	golda_safety@yahoo.com.cn

MSN:

Following is the identify for the standard.
CE EN20345-1:2004 SPECIFICATIONS ON FOOTWEAR FOR PROFESSIONAL USE
200 JOULES TOE PROTECTION
CE EN20346-1:2004 PROFESSIONAL FOOTWEAR
100 JOULES TOE PROTECTION
CE EN20347-1:2004 SPECIFICATIONAS ON FOOTWEAR FOR PROFESSIONAL USE
NO PROTECTIVE TOECAP AGAINST IMPACTS AND CRUSHING(NO STEEL TOE CAP, JUST HARD TOE CAP WITH COMPSITION)

CALCULATION

Drop Height x Weight X Force of gravity(9.81)

Safety (En20345) 1.02m x 20kg x9.81=200 Joules
Protective(En20346) 0.51m x 20 kg x 9.81=100 Joules

SIZE
UK	3	4	5	6	7	7	8	9	10	11	12	13
EUR	36	37	38	39	40	41	42	43	44	45	46	47

FUNCTION

SAFETY CLASS(Reference EN345-1)	Key Symbols

CATEGORY MEANING
Basic Function:	Anti-slipping, Shock-absorption heel, Oil/fuel resistant, Weak acids/alkali resistant Outsole
	SB - Basic safety footwear with steel toe-cap "200 J"
	SBP – Same as SB + resistance to perforation(steel plate)
	S1 - Same as SB + Closed seat region + A + E
	S1P - Same as S1+ resistance to perforation
	S2 - Same as S1 + WRU
	S3 - Same as S2 + P +Cleated Outsoless
Additional marking symbols：
	P – Penetration resistant outsole tested at 1100 newtons
	A – Electrical resistance between foot and ground of between 0.1 and 1000 Mega Ohms *
	HRO –Sole resistant to hot contact of 300 degrees centigrade for 60 seconds
	E – Energy absorption of the seat region tested at 20 Joules
	WRU – Water resistant upper leather C=conductive:maximum resistance 100K∩ CI= insulation against cold HI=insulation against heat